交通与城市环境

Vehicles have recently overtaken coal to become the largest source of air pollution in urban China. Research on mobile sources of pollution has foundered due both to inaccessibility of Chinese data on health outcomes and strong identifying assumptions. To address these, we collect daily ambulance call data from the Beijing Emergency Medical Center and combine them with an idiosyncratic feature of a driving restriction policy in Beijing that references the last digit of vehicles’ license plate numbers. Because the number 4 is considered unlucky by many in China, it tends to be avoided on license plates. As a result, days on which the policy restricts license plates ending in 4 unintentionally allow more vehicles in Beijing. Leveraging this variation, we find that traffic congestion is indeed 22% higher on days banning 4 and that 24-hour average concentration of NO₂ is 12% higher. Correspondingly, these short term increases in pollution increase ambulance calls by 12% and 3% for fever and heart related symptoms, while no effects are found for injuries. These findings suggest that traffic congestion has substantial health externalities in China but that they are also responsive to policy. 

With rapid economic growth, China has witnessed increasingly frequent and severe haze and smog episodes over the past decade, posing serious health impacts to the Chinese population, especially those in densely populated city clusters. Quantification of the spatial and temporal variation of health impacts attributable to ambient fine particulate matter (PM2.5) has important implications for China's policies on air pollution control. In this study, we evaluated the spatial distribution of premature deaths in China between 2000 and 2010 attributable to ambient PM2.5 in accord with the Global Burden of Disease based on a high resolution population density map of China, satellite retrieved PM2.5 concentrations, and provincial health data. Our results suggest that China's anthropogenic ambient PM2.5 led to 1,255,400 premature deaths in 2010, 42% higher than the level in 2000. Besides increased PM2.5 concentration, rapid urbanization has attracted large population migration into the more developed eastern coastal urban areas, intensifying the overall health impact. In addition, our analysis implies that health burdens were exacerbated in some developing inner provinces with high population density (e.g. Henan, Anhui, Sichuan) because of the relocation of more polluting and resource-intensive industries into these regions. In order to avoid such national level environmental inequities, China's regulations on PM2.5 should not be loosened in inner provinces. Furthermore policies should create incentive mechanisms that can promote transfer of advanced production and emissions control technologies from the coastal regions to the interior regions.

In the recent past Beijing has experienced rapid development. This growth has been accompanied by many problems including traffic congestion and air pollution. Understanding what stimulates urban growth is important for sustainable development in the coming years. In this paper, we first estimate a binary auto-logistic model of land use change, using physical and socioeconomic characteristics of the location and its access to major centers within the city as predictors. We find that variables determining regional access, like time distance to the city center, the Central Business District (CBD), industrial centers, employment centers, and the transportation system, significantly impact urban land conversion. By using measures of access to predict land use change we believe that we can better understand the planning implications of urban growth not only in Beijing but other rapidly developing cities.

With most eastern Chinese cities facing major air quality challenges, there is a strong need for city-scale emission inventories for use in both chemical transport modeling and the development of pollution control policies. In this paper, a high-resolution emission inventory of air pollutants and CO₂ for Nanjing, a typical large city in the Yangtze River Delta, is developed incorporating the best available information on local sources. Emission factors and activity data at the unit or facility level are collected and compiled using a thorough onsite survey of major sources. Over 900 individual plants, which account for 97% of the city's total coal consumption, are identified as point sources, and all of the emission-related parameters including combustion technology, fuel quality, and removal efficiency of air pollution control devices (APCD) are analyzed. New data-collection approaches including continuous emission monitoring systems and real-time monitoring of traffic flows are employed to improve spatiotemporal distribution of emissions. Despite fast growth of energy consumption between 2010 and 2012, relatively small inter-annual changes in emissions are found for most air pollutants during this period, attributed mainly to benefits of growing APCD deployment and the comparatively strong and improving regulatory oversight of the large point sources that dominate the levels and spatial distributions of Nanjing emissions overall. The improvement of this city-level emission inventory is indicated by comparisons with observations and other inventories at larger spatial scale. Relatively good spatial correlations are found for SO₂, NO_X, and CO between the city-scale emission estimates and concentrations at 9 state-opertated monitoring sites (R = 0.58, 0.46, and 0.61, respectively). The emission ratios of specific pollutants including BC to CO, OC to EC, and CO₂ to CO compare well to top-down constraints from ground observations. The inter-annual variability and spatial distribution of NO_X emissions are consistent with NO₂ vertical column density measured by the Ozone Monitoring Instrument (OMI). In particular, the Nanjing city-scale emission inventory correlates better with satellite observations than the downscaled Multi-resolution Emission Inventory for China (MEIC) does when emissions from power plants are excluded. This indicates improvement in emission estimation for sectors other than power generation, notably industry and transportation. High-resolution emission inventory may also provide a basis to consider the quality of instrumental observations. To further improve emission estimation and evaluation, more measurements of both emission factors and ambient levels of given pollutants are suggested; the uncertainties of emission inventories at city scale should also be fully quantified and compared with those at national scale. 


It is critical to alleviate problems of energy and air pollutant emissions in a metropolis because these areas serve as economic engines and have large and dense populations. Drivers of fossil fuel use and air pollutants emissions were analyzed in the metropolis of Beijing during 1997-2010. The analyses were conducted from both a bottom-up and a top-down perspective based on the sectoral inventories and structural decomposition analysis (SDA). From a bottom-up perspective, the key energy-intensive industrial sectors directly caused the variations in Beijing's air pollution by means of a series of energy and economic policies. From a top-down perspective, variations in production structures caused increases in most materials during 2000-2010, but there were decreases in PM₁₀ and PM_2.5 emissions during 2005-2010. Population growth was found to be the largest driver of energy consumption and air pollutant emissions during 1997-2010. This finding suggests that avoiding rapid population growth in Beijing could simultaneously control energy consumption and air pollutant emissions. Mitigation policies should consider not only the key industrial sectors but also socioeconomic drivers to co-reduce energy consumption and air pollution in China's metropolis.

China has been experiencing an unprecedented urbanization process. In 2011, China’s urban population reached 691 million with an urbanization rate of 51.27%. Urbanization level is expected to increase to 70% in China in 2030, reflecting the projection that nearly 300 million people would migrate from rural areas to urban areas over this period. At the same time, the total fertility rate of China’s population is declining due to the combined effect of economic growth, environmental carrying capacity, and modern social consciousness. The Chinese government has loosened its “one-child policy” gradually by allowing childbearing couples to have the second child as long as either of them is from a one-child family. In such rapidly developing country, the natural growth and spatial migration will consistently reshape spatial pattern of population. An accurate prediction of the future spatial pattern of population and its evolution trend are critical to key policy-making processes and spatial planning in China including urbanization, land use development, ecological conservation and environmental protection. In this paper, a top-down method is developed to project the spatial distribution of China’s future population with considerations of both natural population growth at provincial level and the provincial migration from 2010 to 2050. Building on this, the spatial pattern and evolution trend of Chinese provincial population are analyzed. The results suggested that the overall spatial pattern of Chinese population will be unlikely changed in next four decades, with the east area having the highest population density and followed by central area, northeast and west area. Four provinces in the east, Shanghai, Beijing, Tianjin and Jiangsu, will remain the top in terms of population density in China, and Xinjiang, Qinghai and Tibet will continue to have the lowest density of population. We introduced an index system to classify the Chinese provinces into three categories in terms of provincial population densities: Fast Changing Populated Region (FCPR), Low Changing Populated Region (LCPR) and Inactive Populated Region (IPR). In the FCPR, China’s population is projected to continue to concentrate in net immigration leading type (NILT) area where receives nearly 99% of new accumulated floating population. Population densities of Shanghai, Beijing, Zhejiang will peak in 2030, while the population density in Guangdong will keep increasing until 2035. Net emigration leading type (NELT) area will account for 75% of emigration population, including Henan, Anhui, Chongqing and Hubei. Natural growth will play a dominant role in natural growth leading type area, such as Liaoning and Shandong, because there will be few emigration population. Due to the large amount of moving-out labors and gradually declining fertility rates, population density of the LCPR region exhibits a downward trend, except for Fujian and Hainan. The majority of the western provinces will be likely to remain relatively low population density, with an average value of no more than 100 persons per km².

Chinese cities are plagued by the rise in resource and energy input and output over the last decade. At the same time, the scale and pace of economic development sweeping across Chinese cities have revived the debate about urban metabolisms, which could be simply seen as the ratio of output to resource and energy input in urban systems. In this study, an emergy (meaning the equivalent solar energy) accounting, sustainable indices of urban metabolisms, and an urban metabolic system dynamics model, are developed in support of the research task on Chinese cities ‘metabolisms and their related policies. The dynamic simulation model used in the paper is capable of synthesizing component-level knowledge into system behavior simulation at an integrated level, which is directly useful for simulating and evaluating a variety of decision actions and their dynamic consequences. For the study case, interactions among a number of Beijing’s urban emergy components within a time frame of 20 years (from 2010 to 2030) are examined dynamically. Six alternative policy scenarios are implemented into the system simulation. Our results indicate that Beijing’s current model of urban metabolism—tertiary industry oriented development mode—would deliver prosperity to the city. However, the analysis also shows that this mode of urban metabolism would weaken urban self-support capacity due primarily to the large share of imported and exported emergy in the urban metabolic system. The keys of improving the efficiency of urban metabolism include the priority on the renewable resource and energy, increase in environmental investment and encouragement on innovative technologies of resource and energy utilization, et al.

Demands for electricity and energy to supply heat are expected to expand by 71% and 47%, respectively, for Beijing in 2020 relative to 2009. If the additional electricity and heat are supplied solely by coal as is the current situation, annual emissions of CO2 may be expected to increase by 59.6% or 99 million tons over this interval. Assessed against this business as usual (BAU) background, the present study indicates that significant reductions in emissions could be realized using wind-generated electricity to provide a source of heat, employed either with heat pumps or with electric thermal storage (ETS) devices. Relative to BAU, reductions in CO2 with heat pumps assuming 20% wind penetration could be as large as 48.5% and could be obtained at a cost for abatement of as little as $15.6 per ton of avoided CO2. Even greater reductions, 64.5%, could be realized at a wind penetration level of 40% but at a higher cost, $29.4 per ton. Costs for reduction of CO2 using ETS systems are significantly higher, reflecting the relatively low efficiency for conversion of coal to power to heat.

Urban systems, with the overall fluxes of energy, water, material, and wastes, can be modeled with a range of metabolic processes. To quantify the urban metabolism, we use the “emergy” assessment method (all materials and energy are transformed to solar energy equivalents) and then present a group of urban metabolic indicators, which quantify urban metabolic balance, capacity, and outputs to assess a city’s metabolic efficiencies. In this paper, we use 31 Chinese cities as a sample to illustrate how the model can be operated to evaluate the urban metabolism by emergy analysis. Our results indicate that metropolises and coastal cities were more metabolically efficient with higher metabolic balance, capacities, and outputs; but with more external dependency on imported resources. Central and western cities had lower metabolic efficiencies, with a high ratio of non-renewable emergy reliance. Policy implications highlight the need for renewable energy sources and improved management of imported services, goods, and fuels to achieve higher urban resilience and sustainability.