出版文献

Biomass pyrolysis offers an alternative to industrial coal-fired boilers and utilizes low temperature and long residence time to produce syngas, bio-oil and biochar. Construction of biomass-based pyrolysis plants has recently been on the rise in rural China necessitating research into the greenhouse gas emission levels produced as a result. Greenhouse gas emission intensity of a typical biomass fixed-bed pyrolysis plant in China is calculated as 1.55E−02 kg CO₂-eq/MJ. Carbon cycle of the whole process was investigated and found that if 41.02% of the biochar returns to the field, net greenhouse gas emission is zero indicating the whole carbon cycle may be renewable. A biomass pyrolysis scenario analysis was also conducted to assess exhaust production, transportation distance and the electricity-generation structure for background information applied in the formulation of national policy.

Understanding the rapidly rising demand for energy in China is essential to efforts to reduce the country's energy use and environmental damage. In response to rising incomes and changing prices and demographics, household use of various fuels, electricity and gasoline has changed dramatically in China. In this paper, we estimate both income and price elasticities for various energy types using Chinese urban household micro-data collected by National bureau of Statistics, by applying a two-stage budgeting AIDS model. We find that total energy is price and income inelastic for all income groups after accounting for demographic and regional effects. Our estimated electricity price elasticity ranges from - 0.49 to -0.57, gas price elasticity ranges from -0.46 to -0.94, and gasoline price elasticity ranges from -0.85 to -0.94. Income elasticity for various energy types range from 0.57 to 0.94. Demand for coal is most price and income elastic among the poor, whereas gasoline demand is elastic for the rich.

With rapid economic growth, China has witnessed increasingly frequent and severe haze and smog episodes over the past decade, posing serious health impacts to the Chinese population, especially those in densely populated city clusters. Quantification of the spatial and temporal variation of health impacts attributable to ambient fine particulate matter (PM2.5) has important implications for China's policies on air pollution control. In this study, we evaluated the spatial distribution of premature deaths in China between 2000 and 2010 attributable to ambient PM2.5 in accord with the Global Burden of Disease based on a high resolution population density map of China, satellite retrieved PM2.5 concentrations, and provincial health data. Our results suggest that China's anthropogenic ambient PM2.5 led to 1,255,400 premature deaths in 2010, 42% higher than the level in 2000. Besides increased PM2.5 concentration, rapid urbanization has attracted large population migration into the more developed eastern coastal urban areas, intensifying the overall health impact. In addition, our analysis implies that health burdens were exacerbated in some developing inner provinces with high population density (e.g. Henan, Anhui, Sichuan) because of the relocation of more polluting and resource-intensive industries into these regions. In order to avoid such national level environmental inequities, China's regulations on PM2.5 should not be loosened in inner provinces. Furthermore policies should create incentive mechanisms that can promote transfer of advanced production and emissions control technologies from the coastal regions to the interior regions.

Development of shale gas resources is expected to play an important role in China's projected transition to a low-carbon energy future. The question arises whether the availability of water could limit this development. The paper considers a range of scenarios to define the demand for water needed to accommodate China's projected shale gas production through 2020. Based on data from the gas field at Fuling, the first large-scale shale gas field in China, it is concluded that the water intensity for shale gas development in China (water demand per unit lateral length) is likely to exceed that in the US by about 50%. Fuling field would require a total of 39.9–132.9 Mm³ of water to achieve full development of its shale gas, with well spacing assumed to vary between 300 and 1000 m. To achieve the 2020 production goal set by Sinopec, the key Chinese developer, water consumption is projected to peak at 7.22 Mm³ in 2018. Maximum water consumption would account for 1% and 3%, respectively, of the available water resource and annual water use in the Fuling district. To achieve China's nationwide shale gas production goal set for 2020, water consumption is projected to peak at 15.03 Mm³ in 2019 in a high-use scenario. It is concluded that supplies of water are adequate to meet demand in Fuling and most projected shale plays in China, with the exception of localized regions in the Tarim and Jungger Basins.

Accommodating variable wind power poses a critical challenge for electric power systems that are heavily dependent on combined heat and power (CHP) plants, as is the case for north China. An improved unit-commitment model is applied to evaluate potential benefits from pumped hydro storage (PHS) and electric boilers (EBs) in West Inner Mongolia (WIM), where CHP capacity is projected to increase to 33.8 GW by 2020. A business-as-usual (BAU) reference case assumes deployment of 20 GW of wind capacity. Compared to BAU, expanding wind capacity to 40 GW would allow for a reduction in CO₂ emissions of 33.9 million tons, but at a relatively high cost of US$25.3/ton, reflecting primarily high associated curtailment of wind electricity (20.4%). A number of scenarios adding PHS and/or EBs combined with higher levels of wind capacity are evaluated. The best case indicates that a combination of PHS (3.6 GW) and EBs (6.2 GW) together with 40 GW of wind capacity would reduce CO₂ emissions by 43.5 million tons compared to BAU, and at a lower cost of US$16.0/ton. Achieving this outcome will require a price-incentive policy designed to ensure the profitability of both PHS and EB facilities.

Torrefaction of biomass can reduce its undesirable properties for the subsequent thermochemical application. After separating a Chinese corn stalk into four parts (leaf, stem, root, and cob), torrefaction was performed at temperatures of 200, 250, and 300 °C respectively. The structural and components differences of various parts were analyzed, along with the solid, gas, and liquid products. The study showed that the root was the most sensitive to heat and the cob showed the biggest increase in CO2 and CO yields with the increase temperature, due to their different content of hemicellulose and cellulose. The torrefaction temperature of 250 °C was especially significant for the formation of acids. Liquid product from the leaf was simpler in composition and lower in yield due to higher content of organic extractives and ash. Generally, various parts have different torrefaction properties due to the differences in chemical composition and cellular structure. And with the thermochemical application of biomass were more widely used in the chemical industry especially fine chemical industry, screening and classification may be necessary.

In the recent past Beijing has experienced rapid development. This growth has been accompanied by many problems including traffic congestion and air pollution. Understanding what stimulates urban growth is important for sustainable development in the coming years. In this paper, we first estimate a binary auto-logistic model of land use change, using physical and socioeconomic characteristics of the location and its access to major centers within the city as predictors. We find that variables determining regional access, like time distance to the city center, the Central Business District (CBD), industrial centers, employment centers, and the transportation system, significantly impact urban land conversion. By using measures of access to predict land use change we believe that we can better understand the planning implications of urban growth not only in Beijing but other rapidly developing cities.

Based on assimilated meteorological data for the period January 1979 to December 2010, the origin of wind energy is investigated from both mechanical and thermodynamic perspectives, with special focus on the spatial distribution of sources, historical long term variations and the efficiency for kinetic energy production. The dry air component of the atmosphere acts as a thermal engine, absorbing heat at higher temperatures, approximately 256 K, releasing heat at lower temperatures, approximately 252 K. The process is responsible for production of wind kinetic energy at a rate of 2.46 W/m²  sustaining thus the circulation of the atmosphere against frictional dissipation. The results indicate an upward trend in kinetic energy production over the past 32 years, indicating that wind energy resources may be varying in the current warming climate. This analysis provides an analytical framework that can be adopted for future studies addressing the ultimate wind energy potential and the possible perturbations to the atmospheric circulation that could arise as a result of significant exploitation of wind energy.    

With most eastern Chinese cities facing major air quality challenges, there is a strong need for city-scale emission inventories for use in both chemical transport modeling and the development of pollution control policies. In this paper, a high-resolution emission inventory of air pollutants and CO₂ for Nanjing, a typical large city in the Yangtze River Delta, is developed incorporating the best available information on local sources. Emission factors and activity data at the unit or facility level are collected and compiled using a thorough onsite survey of major sources. Over 900 individual plants, which account for 97% of the city's total coal consumption, are identified as point sources, and all of the emission-related parameters including combustion technology, fuel quality, and removal efficiency of air pollution control devices (APCD) are analyzed. New data-collection approaches including continuous emission monitoring systems and real-time monitoring of traffic flows are employed to improve spatiotemporal distribution of emissions. Despite fast growth of energy consumption between 2010 and 2012, relatively small inter-annual changes in emissions are found for most air pollutants during this period, attributed mainly to benefits of growing APCD deployment and the comparatively strong and improving regulatory oversight of the large point sources that dominate the levels and spatial distributions of Nanjing emissions overall. The improvement of this city-level emission inventory is indicated by comparisons with observations and other inventories at larger spatial scale. Relatively good spatial correlations are found for SO₂, NO_X, and CO between the city-scale emission estimates and concentrations at 9 state-opertated monitoring sites (R = 0.58, 0.46, and 0.61, respectively). The emission ratios of specific pollutants including BC to CO, OC to EC, and CO₂ to CO compare well to top-down constraints from ground observations. The inter-annual variability and spatial distribution of NO_X emissions are consistent with NO₂ vertical column density measured by the Ozone Monitoring Instrument (OMI). In particular, the Nanjing city-scale emission inventory correlates better with satellite observations than the downscaled Multi-resolution Emission Inventory for China (MEIC) does when emissions from power plants are excluded. This indicates improvement in emission estimation for sectors other than power generation, notably industry and transportation. High-resolution emission inventory may also provide a basis to consider the quality of instrumental observations. To further improve emission estimation and evaluation, more measurements of both emission factors and ambient levels of given pollutants are suggested; the uncertainties of emission inventories at city scale should also be fully quantified and compared with those at national scale. 


It is critical to alleviate problems of energy and air pollutant emissions in a metropolis because these areas serve as economic engines and have large and dense populations. Drivers of fossil fuel use and air pollutants emissions were analyzed in the metropolis of Beijing during 1997-2010. The analyses were conducted from both a bottom-up and a top-down perspective based on the sectoral inventories and structural decomposition analysis (SDA). From a bottom-up perspective, the key energy-intensive industrial sectors directly caused the variations in Beijing's air pollution by means of a series of energy and economic policies. From a top-down perspective, variations in production structures caused increases in most materials during 2000-2010, but there were decreases in PM₁₀ and PM_2.5 emissions during 2005-2010. Population growth was found to be the largest driver of energy consumption and air pollutant emissions during 1997-2010. This finding suggests that avoiding rapid population growth in Beijing could simultaneously control energy consumption and air pollutant emissions. Mitigation policies should consider not only the key industrial sectors but also socioeconomic drivers to co-reduce energy consumption and air pollution in China's metropolis.

China is experiencing severe carbonaceous aerosol pollution driven mainly by large emissions from intensive use of solid fuels. To gain a better understanding of the levels and trends of carbonaceous aerosol emissions and the resulting ambient concentrations at the national scale, we update an emission inventory of anthropogenic organic carbon (OC) and elemental carbon (EC), and employ existing observational studies to analyze characteristics of these aerosols including temporal, spatial, and size distributions, and the levels and contributions of secondary organic carbon (SOC) to total OC. We further use ground observations to test the levels and inter-annual trends of the calculated national and provincial emissions of carbonaceous aerosols, and propose possible improvements in emission estimation for the future. The national OC emissions are estimated to have increased 29% from 2000 (2127 Gg) to 2012 (2749 Gg) and EC by 37% (from 1356 to 1857 Gg). The residential, industrial, and transportation sectors contributed an estimated 76±2%, 19±2% and 5±1% of the total emissions of OC, respectively, and 52±3%, 32±2% and 16±2% of EC. Updated emission factors based on the most recent local field measurements, particularly for biofuel stoves, lead to considerably lower emissions of OC compared to previous inventories. Compiling observational data across the country, higher concentrations of OC and EC are found in northern and inland cities, while larger OC/EC and SOC/OC ratios are found in southern cities, due to the joint effects of primary emissions and meteorology. Higher SOC/OC ratios are estimated at rural and background sites compared to urban ones, attributed to more emissions of OC from biofuel use, more biogenic emissions of volatile organic compound (VOC) precursors to SOC, and/or transport of aged aerosols. For most sites, higher concentrations of OC, EC, and SOC are observed in colder seasons, while SOC/OC is reduced, particularly at regional sites, attributed partly to weaker atmospheric oxidation and SOC formation compared to summer. Enhanced SOC formation from oxidization and anthropogenic activities like biomass combustion is judged to have crucial effects on severe haze events characterized by high particle concentrations. Several observational studies indicate an increasing trend in ambient OC/EC (but not in OC or EC individually) from 2000 to 2010, confirming increased atmospheric oxidation of OC across the country. Combining the results of emission estimation and observations, the improvement over prior emission inventories is indicated by inter-annual comparisons and correlation analysis. It is also indicated, however, that the estimated growth in emissions might be faster than observed growth, and that some sources with high primary OC/EC like burning of biomass are still underestimated. Further studies to determine changing emission factors over time in the residential sector and to compare to other measurements such as satellite observations are thus suggested to improve understanding of the levels and trends of primary carbonaceous aerosol emissions in China.

The household-scale biogas system gains its popularity in rural China, and is now playing a prominent role in relieving energy shortages and reducing environmental pollution. A comprehensive review is performed for related environmental and ecological assessment studies. For an overall assessment of the biogas system, especially for its renewability and sustainability, an updated exergy methodology in terms of cosmic exergy is introduced in this paper, and is concretely illustrated by a case study to an integrated biogas engineering in Hubei, China. Associated with the fundamental universal scale of the cosmic-solar-terrestrial ecosystem, this new approach aggregates natural resources, economic inputs and environmental contamination on a common basis. Furthermore, a series of cosmic exergy based indicators are established to quantify the renewability and sustainability of the system. The integrated biogas engineering is proved to be with remarkable positive net ecological benefits, around twice that of the corresponding conventional production system. Near half of resource inputs in the integrated biogas system are found to be renewable. The renewability and sustainability of the biogas system turn out to be respectively double and six times those of the conventional system. The findings are fully supportive for policy makers in their action towards further progress of biogas project for sustainable development.

China has been experiencing an unprecedented urbanization process. In 2011, China’s urban population reached 691 million with an urbanization rate of 51.27%. Urbanization level is expected to increase to 70% in China in 2030, reflecting the projection that nearly 300 million people would migrate from rural areas to urban areas over this period. At the same time, the total fertility rate of China’s population is declining due to the combined effect of economic growth, environmental carrying capacity, and modern social consciousness. The Chinese government has loosened its “one-child policy” gradually by allowing childbearing couples to have the second child as long as either of them is from a one-child family. In such rapidly developing country, the natural growth and spatial migration will consistently reshape spatial pattern of population. An accurate prediction of the future spatial pattern of population and its evolution trend are critical to key policy-making processes and spatial planning in China including urbanization, land use development, ecological conservation and environmental protection. In this paper, a top-down method is developed to project the spatial distribution of China’s future population with considerations of both natural population growth at provincial level and the provincial migration from 2010 to 2050. Building on this, the spatial pattern and evolution trend of Chinese provincial population are analyzed. The results suggested that the overall spatial pattern of Chinese population will be unlikely changed in next four decades, with the east area having the highest population density and followed by central area, northeast and west area. Four provinces in the east, Shanghai, Beijing, Tianjin and Jiangsu, will remain the top in terms of population density in China, and Xinjiang, Qinghai and Tibet will continue to have the lowest density of population. We introduced an index system to classify the Chinese provinces into three categories in terms of provincial population densities: Fast Changing Populated Region (FCPR), Low Changing Populated Region (LCPR) and Inactive Populated Region (IPR). In the FCPR, China’s population is projected to continue to concentrate in net immigration leading type (NILT) area where receives nearly 99% of new accumulated floating population. Population densities of Shanghai, Beijing, Zhejiang will peak in 2030, while the population density in Guangdong will keep increasing until 2035. Net emigration leading type (NELT) area will account for 75% of emigration population, including Henan, Anhui, Chongqing and Hubei. Natural growth will play a dominant role in natural growth leading type area, such as Liaoning and Shandong, because there will be few emigration population. Due to the large amount of moving-out labors and gradually declining fertility rates, population density of the LCPR region exhibits a downward trend, except for Fujian and Hainan. The majority of the western provinces will be likely to remain relatively low population density, with an average value of no more than 100 persons per km².

China is now the largest emitter of CO₂ in the world, having contributed nearly half of the global increase in carbon emissions between 1980 and 2010. The existing literature on China’s carbon emissions has focused on two dimensions: the amount of CO₂ emitted within China’s geographical boundaries (a production-based perspective), and the drivers of, and responsibility for, these emissions (a consumption-based perspective). The current study begins with a comprehensive review of China’s CO₂ emissions, and then analyzes their driving forces from both consumption and production perspectives, at both national and provincial levels. It is concluded that China’s aggregate national CO₂ emissions from fossil fuel consumption and cement production maintained high growth rates during 2000-2010. National emissions reached 6.8–7.3 billion tons in 2007, nearly 25% of which were caused by net exports (i.e., exports minus imports) to other countries. However, emission characteristics varied significantly among different regions and provinces, and considerable emission leakage from the developed eastern regions to inland and western areas of the country was found. The objectives of China’s policies should therefore be broadened from continued improvement of energy efficiency to accelerating regional technology transfer and preventing mere relocation of carbon-intensive economic activities from developed coastal regions to less developed, inland provinces. To rapidly and effectively cut down China’s carbon emissions, moreover, its energy supply should be aggressively decarbonized by promoting renewable and low carbon energy sources.

The Hadley system provides an example of a thermally direct circulation; the Ferrel system in contrast provides an example of a thermally indirect circulation. In this study, the authors develop an approach to investigate the key thermodynamic properties of the Hadley and Ferrel systems, quantifying them using assimilated meteorological data covering the period January 1979–December 2010. This analysis offers a fresh perspective on the conversion of energy in the atmosphere from diabatic heating to the production of atmospheric kinetic energy. The results indicate that the thermodynamic efficiency of the Hadley system, considered as a heat engine, has been relatively constant over the 32-yr period covered by the analysis, averaging 2.6%. Over the same interval, the power generated by the Hadley regime has risen at an average rate of about 0.54 TW yr⁻¹; this reflects an increase in energy input to the system consistent with the observed trend in the tropical sea surface temperatures. The Ferrel system acts as a heat pump with a coefficient of performance of 12.1, consuming kinetic energy at an approximate rate of 275 TW and exceeding the power production rate of the Hadley system by 77 TW.